LONG LINE SHOCK ABSORBERS

Purpose:

The SA-P-10 Shock Absorber has been designed to dampen the shock and vibration on helicopter airframes when used in conjunction with long line applications and reduce pilot and aircraft fatigue.

NOTE: This unit is not intended to be attached directly to the airframe.

PRODUCT FEATURES:

• Lift capacity:   0 to 10,000 lbs. (4536 kg)

• Design Ultimate Strength for the cylinder: 25,000 lbs. (11,340 kg)

• 90 Shore Durometer Polyurethane springs;

• Anti-rotation device included;

• High strength tie-rod type housing;

• Simple, rugged construction;

• Single lifting points at either end of unit.

• Weight: 47 lbs. (22kg)

• Height: 28.5 inches (724mm)

• Width: 4.5 inches (114mm)

• Lifting hole diameter: 1" (25.4mm)

• Mounting: Top and bottom lifting points accomodate a 4 ¾ ton shackle.

6,000 lb. Polyurethane Shock Absorber

Purpose:

The SA-P-6 Shock Absorber has been designed to dampen the shock and vibration on helicopter airframes when used in conjunction with long line applications and reduce pilot and aircraft fatigue.

NOTE: This unit is not intended to be attached directly to the airframe.

PRODUCT FEATURES:

• Lift capacity:   0 to 6,000 lbs. (2720 kg)

• Design Ultimate Strength for the cylinder: 15,000 lbs. (6,800 kg)

• 80 Shore Durometer Polyurethane springs;

• Anti-rotation device included;

• High strength tie-rod type housing;

• Simple, rugged construction;

• Single lifting points at either end of unit.

• Weight: 32 lbs. (14.5kg)

• Height: 24.5 inches (622mm)

• Width: 3.75 inches (95mm)

• Lifting hole diameter: 1" (25.4mm)

• Mounting: Top and bottom lifting points accommodate a 4 ¾ ton shackle.